Reo Galvanised Dowel Bar
Reo Galvanised Dowel Bar – Available in 12mm, 16mm & 20mm diameter
Reo L Bar – N12 – 600mm x 600mm
Rod – 6mtr lengths
RW6.00, RW7.60, RW9.50, RW10.65, RW11.90, R16 & R20
N12, N16 & N20
Reinforcement Mesh
200mm squares x 2.4mtr wide x 6mtr long
Available in SL62, SL72, SL82, SL92 & SL102
Reinforcement Bar – 6mtr lengths
N16, N20 & N24
Metal Decking
We supply both Bond Deck and Kingflour
A composite steel formwork solution suitable for composite concrete slabs in concrete and steel framed construction
KF57-user-install-guide
KINGFLOR RF55 – A composite steel formwork system that provides unmatched performance in suspended concrete slabs. Used in both concrete and steel frame construction
RF55-flyer
Trench Mesh – Flat
8mm – 200mm (3 bar) or 300mm (4 bar) widths
11mm – 200mm (3 bar) or 300mm (4 bar) widths
12mm – 200mm (3 bar) or 300mm (4 bar) widths
Trench Mesh – Boxed
8mm – 200mm wide x 150mm deep – STOCKED
11mm – 200mm wide x 300mm deep – STOCKED
BOXED MESH IN OTHER SIZES IS AVAILABLE AND MADE TO ORDER – P.O.A.
Connolly Key Joint
Connolly Key Joint- Sold per 6mtr length
100mm, 150mm & 200mm.
Key Joint Capping – Removable – Sold per metre
Bar Chairs
Bar Chairs – Plastic
Bar Chair Bases – available in Small Square or Large Round
Deck Chairs – Plastic
Plastic Deck Chair Bases – per 100
Dowel Bar Guards
Dowel Bar Guards – Black – 100 per pack
Dowel Caps – Safety caps for starter bars – Yellow – 20mm – sold as each
Fibre Cement
Saddingtons can supply all your Fibre Cement needs, we have in stock or can order in for you all of the following Fibre Cement products:
- Hardie Flex
- Villa Board
- Flooring
- Underlay
- Columns
Read more about James Hardie Fibre Cement Products
Cladding
Saddingtons have your Cladding needs covered, we can supply all of the following products, from the following companies:
James Hardie- Scyon Prodcuts
- Primeline Weather Board
- Panel Clad
- Hardie Tex
- Hardie Plank
- Com Tex
More information on James Hardie Cladding Products
Weather Tex
- Classic
- Primelok
- Solfok
- Exterior Board/High Impact Board
For more information on Weather Tex Cladding products
EPS Foam Cladding
Framing Timber
Saddingtons stock a large range of timber to cover all your framing needs, we stock the following (ALL SIZES AVAIALBE):
- MGP 10
- H2 TERMITE TREATED Stora Enso & Carter Holt Harvey
- F7 RADIARTA
Treated Timber
We have a big range of treated timber, come in and see us for all your treated timber needs, we stock the following
- H3 FRAMING TIMBER
- H4 POSTS
- PRIMED H3 TREATED PINE
- FENCING
Engineered Timber
We can supply all your engineered timber needs and stock the following products:
- LVL
- I-JOISTS
- RED ALERT
External Doors
We can supply all your External Door needs, we stock both Corinthian and Humes doors and if we don’t have in stock, we will gladly order it in!
Skirting boards, Door Jambs & Architraves
Saddingtons stock a large range of Skirting boards, Door Jambs and Architrave timber
Mouldings
Saddingtons stock a large range of Ezitrim moulding products, the trims are pre primed ready for top coat for your convienience, to read more – EziTrim PDF
Decking
Saddingtons stock all your timber decking needs, with your choice of:
- Blackbutt
- Merbau
- Treated Pine
Power Panel SP
Commonly used in:
- Apartments
- Low rise multi-residential
- Commercial
Top applications
- Shaft & scissor walls
Service and shaft walls with PowerPanel SP Option 1
Bare system recommended for shafts up to 4800mm high, requiring 2hr FRL (horizontal installation).
Benefits of using Hebel PowerPanel SP for service and shaft walls:
Easier handling and installation- 300mm panel width is lighter and easier to manoeuvre
- Tongue and groove profile ensures a snug fit
- No sealant or thin bed adhesive required between joints (unless acoustic performance required)
Flexibility in tight access areas
- Install horizontally to 4800mm height
- Cuttable lengths up to 4800mm
- Clear spans up to 2400mm (with minimum 300mm bearing each end)
Savings
- No wet trade required, less mess
- Fast to install
- Fewer trades on site
Compliance
- Bare system achieves FRL of -/120/120
- Satisfies BCA requirements for non-load bearing internal walls (Type A & B construction), Class 2 to 9 buildings
- Extends the versatility of Hebel into even more applications
For more information visit, Hebel website
Power Panel XL
Commonly used in:
- Residential walls
- Low rise multi-residential
Top applications
- Boundary walls
Hebel PowerPanelXL external wall system has been specifically developed to go up fast!
The system consists of 75mm thick, steel-reinforced PowerPanelXL panels, fixed vertically to horizontal top hats attached to the load bearing frame.PowerPanelXL has been developed so it's 20% lighter than previous systems while maintaining its structural integrity. This lightweight panel, combined with the perforated steel top hat fixing system, speeds up installation with a whole lot less fatigue.
The PowerPanelXL system:
- Is much faster than laying bricks – two people can install up to 150m2 in three days depending on site conditions
- Is easy to grip, lift and move with less wear and tear on the body
- Is non-combustible with an FRL of 180/180/180
- Has outstanding thermal and acoustic insulation qualities, increasing levels of comfort and saving on energy heating and cooling costs
- Has the 'Good Environmental Choice Australia Label' (Heb-2006) tick of approval
- Allows design patterns to be easily machined into the panels
Fire 180/180/180
Thermal R1.54 – R3.54
Wall thickness 185mm – 205mm* depending on stud cavity and Top Hat selectionFor more information, visit Hebal website
Power Panel
Commonly used in:
- Apartments
- Low rise multi-residential
- Retirement
- Commercial
Top applications
- Internal walls
- External walls
Hebel for external facade walls
Hebel PowerPanel can be used for external facade walls either with hidden or visible edge beams. This lightweight product provides substantial cost savings compared to traditional masonry (bricks and pre-cast concrete)
Benefits of using Hebel PowerPanel for external facade walls:- Fast construction timetables with less reliance on bricklaying trades and less scaffolding costs
- Versatility of design with a pressure equalised system
- Systemised building components make construction faster and easier than brick
- Smaller crews without need for wet trades
- Low wastage and reduced crane requirement, especially compared to brick
- No reliance on bricklayers and better utilisation of standard trades people
- Solid and secure with high fire rating levels
- Matches to superior coating systems without leaching of the acrylic system
- Wet weather tolerant (no mould) for storage and building process
- Strong acoustic values dampen exterior noise
- High levels of sustainability and ‘green’ credentials
For more information visit, Hebel website
Power Block
Commonly used in:
- Alterations & additions
- Low rise multi-residential
- DIY
Top applications
- External walls
PowerBlock+ the premium alternative to double brick
Solid masonry construction has long been regarded as the 'ultimate' home building method. Hebel PowerBlock+ is the ideal alternative to double brick, giving you an extremely solid construction with exceptional acoustic and thermal insulation properties to provide a more comfortable and energy efficient home.
The face size of a PowerBlock+ is 600mm x 200mm. External walls are typically constructed using 250mm thick Hebel PowerBlock+ whilst internal non-loadbearing block walls generally use the 100mm PowerBlock+. The large format blocks are lightweight and, forming a single wall, are rapidly installed- A solid load-bearing masonry home
- A Hebel PowerBlock+ home 'breathes' and controls moisture making it an incredibly comfortable living environment
- With over one and half times the thermal resistance of double brick, Hebel PowerBlocks+ systems* easily exceed the building Code of Australia (BCA) minimum energy requirements for climatic zones 1 to 7 inclusive
- Excellent acoustic performance and sound insulation attributes
- Design and build freedom and flexibility – easily worked with standard power tools
- Non-combustible – up to a four hour fire rating makes the Hebel PowerBlock+ System ideal for rural or bush fire prone areas
- Enhanced design freedom can be achieved through routing and shaping. Lintels and sill blocks complement the high aesthetic appearance
* PowerBlock+ systems 1705, 1706, 1707. James Fricker Report 107.69, 107.71, 107.72 and 107.73
Fire up to 240/240/240
Acoustic Rw + Ctr 35 to 42
Thermal R2.04 to R4.19
Wall thickness 250mm to 356mm*
Power Floor
Commonly used in:
- Residential homes
- Low rise multi-residential
- DIY
Top applications
- Flooring
- Decking
Hebel PowerFloor system – a sound choice for a solid floor substrate for timber and steel joists
PowerFloor is a strong and solid flooring system used in first floors or suspended ground floors, as well as decks and balconies.
PowerFloor panels are made from aerated concrete that's reinforced with corrosion protected steel mesh. The panels are easily installed over steel or timber joists. The result is an excellent solid base for just about any floor covering.
The acoustic and thermal insulation benefits of PowerFloor can provide a more comfortable and tranquil home. You can feel safer knowing that Hebel is non-combustible and has proven fire resistant levels up to 240 minutes.
The PowerFloor system:- Eliminates squeaking associated with particle board floors and noise transfer
- Has a solid feel eliminating the bounce and flex of timber sheet flooring
- Has superior thermal performance – particularly for suspended floors on sloping sites
- Is extremely strong – each panel is reinforced with corrosion-protected steel mesh
- Panels fit snugly together to form a strong and smooth floor
- Is installed like conventional particleboard using onsite tradesmen such as carpenters
- Is not affected by weather during installation
Fire Up to 240 minutes from above, up to 120 minutes from below (with approved CSR Gyprock ceiling)
Acoustic – no ceiling system Rw + Ctr 30 to 33, Lnw + Cl 83 to 45
Acoustic – with ceiling system Rw + Ctr 48 to 54, Lnw + Cl 70 to 32
Thermal R0.79 to R3.66
- Home
- About
Products
- Owner Builder?
- Contact
